Coarse Flock - Woodland Fern Light Green

• Hobby-grade coarse flock — exceptional volume, depth, and texture
• Bright woodland fern light green — fresh, vivid finish for spring forest and new-growth themes
• Coarse grain size — ideal for dense fern undergrowth, terrain boards, and tree foliage
• Easy to apply — glue, pour, press, shake off excess, and seal
• Compatible with all adhesives — PVA, basing glue, and scenic glue
• Pairs beautifully with darker green flock tones for a natural, layered finish
• Suitable for 15mm, 28mm & 32mm scale miniature bases and terrain
• Available in 250ml and 500ml sizes

• Apply generously — coarse flock needs a good layer to build up realistic volume and depth
• Press firmly into wet glue — press the flock down gently after pouring to ensure good adhesion before shaking off the excess
• Use as a highlight layer — apply Woodland Fern Light Green over a base of darker green flock for a natural, sun-dappled highlight effect
• Layer for depth — apply a base layer of turf green or forest green coloured sand first, then build coarse flock on top for a rich, layered spring woodland floor
• Mix colours for realism — blend Woodland Fern Light Green with Woodland Fern Mid Green or Soft Moss for a varied, convincing forest floor texture
• Build spring tree foliage — apply to armature wire or foam tree shapes with PVA for bright, fresh spring canopy trees
• Seal thoroughly — apply scenic sealant or diluted PVA over dried flock to lock it in place for gaming use
• Drybrush for extra highlights — a light drybrush of pale yellow or cream over sealed flock adds a bright, sun-lit spring glow

This coarse flock is designed to create highly realistic, dense foliage, brush, and textured ground cover.

What You Will Need:

• Geek Gaming Scenics Coarse Flock
• Scenic Glue (PVA or Fast Drying Basing Glue is recommended)
• Applicator tool (old brush, sculpting tool, or spatula)
• Sealant/Matte Varnish (Recommended)
• Collection Tray (to catch excess flock)

Step-by-Step Guide for Miniature Bases & Small Terrain:

1. Prepare the Surface: Ensure the surface (base or terrain piece) is clean, dry, and has any base coats of paint applied.
2. Apply the Glue: Using an old brush or sculpting tool, apply an even, liberal layer of scenic glue to the specific area where you want the flock to adhere.Tip: For extra texture, you can stipple the glue to create small peaks and valleys.
3. Apply the Flock: Hold the base over your collection tray. Generously scoop or pinch the Coarse Flock and sprinkle or press it directly onto the wet glue. Ensure the area is completely covered.For Dense Brush: Gently press the flock into the glue to achieve maximum volume and adhesion.
4. Remove Excess: Carefully tap the base firmly against the side of your collection tray to dislodge all loose and excess flock. Collect the fallen flock for reuse.
5. Allow to Dry: Allow the base to dry completely. This can take anywhere from 2 to 24 hours depending on the type and thickness of the glue used.
6. Seal (Recommended): Once completely dry, apply a coat of Matt Scenic Sealant Spray or matte varnish over the flocked area to permanently lock the material in place and prevent shedding.

Tips for Large Terrain Boards:

• Patchwork Application: Work in small, manageable sections to prevent the glue from drying before you apply the flock.
• Layering for Realism: To achieve varied texture, first apply a layer of fine sand or earth scatter, seal it, and then apply the Coarse Flock over specific areas (like bushes or banks) for layered depth.
• Blending: When flocking next to areas of static grass or other materials, use a clean, dry brush while the glue is wet to gently blend the edges for a more natural transition.